浅议沥青路面冷再生技术

全面论述了沥青路面冷再生技术。     

MBR工艺在车站站房污水回用中的经济分析

MBR（Membrane Bioreactor）工艺是将生物处理与膜分离技术相结合而成的一种高效污水处理新工艺。此文就其在车站站房污水回用工程领域的应用进行了经济分析和比较，结果表明，MBR工艺比传统的中水处理工艺具有更强的竞争力。     

我国甲醇汽车冷启动技术研究发展综述

甲醇燃料在国内已经大量运用于汽车发动机,但由于甲醇的物化特性导致甲醇发动机存在冷启动困难问题,文章通过查阅相关资料,总结了国内相关研究者针对这一问题所做研究,并提出甲醇汽车冷启动技术未来发展方向。结果表明只要采取一定的辅助措施,就能让甲醇发动机在特定温度下顺利起动。其中,效果最好的能达到在-25℃下顺利起动。     

辽阳出口路现场热再生简析

重点介绍了辽阳出口路现场热再生沥青混合料的级配设计和施工工艺及施工过程中的质量控制要点。     

Reducing CO2 emissions in temperature-controlled road transportation using the LDVRP model

Temperature-controlled transport is needed to maintain the quality of products such as fresh and frozen foods and pharmaceuticals. Road transportation is responsible for a considerable part of global emissions. Temperature-controlled transportation exhausts even more emissions than ambient temperature transport because of the extra fuel requirements for cooling and because of leakage of refrigerant. The transportation sector is under pressure to improve both its environmental and economic performance. To explore opportunities to reach this goal, the Load-Dependent Vehicle Routing Problem (LDVRP) model has been developed to optimize routing decisions taking into account fuel consumption and emissions related to the load of the vehicle. However, this model does not take refrigeration related emissions into account. We therefore propose an extension of the LDVRP model to optimize routing decisions and to account for refrigeration emissions in temperature-controlled transportation systems. This extended LDVRP model is applied in a case study in the Dutch frozen food industry. We show that taking the emissions caused by refrigeration in road transportation can result in different optimal routes and speeds compared with the LDVRP model and the standard Vehicle Routing Problem model. Moreover, taking the emissions caused by refrigeration into account improves the estimation of emissions related to temperature-controlled transportation. This model can help to reduce emissions of temperature-controlled road transportation.     

沥青路面基层冷再生材料路用性能的室内试验研究

通过室内试验对水泥稳定冷再生混合料的无侧限抗压强度、抗压回弹模量、劈裂强度、抗冲刷性能进行了系统的研究.试验结果表明,水泥剂量为5%时,冷再生材料的强度和其它路用性能指标均满足规范的要求.     

二灰冷再生沥青路面基层路用性能研究

通过对原路材料进行材料组成分析,并且通过对几种不同配合比的冷再生材料的无侧限抗压强度、劈裂强度、冲刷性能的初步研究,对二灰冷再生材料的性能做出了初步评价.二灰冷再生材料基本可以满足规范对沥青路面的半刚性基层的要求.     

泡沫沥青冷再生基层力学性能的试验研究

对现场泡沫沥青冷再生基层的力学性能进行了研究,主要内容有根据泡沫沥青的性能指标确定了泡沫沥青的制备条件;根据国内对基层强度的要求和国外的规程,进行了无侧限抗压强度试验和间接抗拉劈裂强度试验,确定了最佳泡沫沥青用量,评价了泡沫沥青冷再生基层的力学性能。     

新型发电机组负载测试兼码头供电双向变频电源

随着舰船朝大型化、自动化方向发展,舰船的发电机组数量和容量也急剧增大。为保证船舶的安全运营,船级社规范要求对发电机组进行负载试验和并联运行试验。新型发电机组负载测试兼码头供电双向变频电源不仅可用于船舶的发电机组负载测试试验,同时还可实现电能的回收利用,作为变频电源向系泊试验船舶提供电能,减少对船厂周围环境造成的污染,具有较好的经济效益和社会效益。     

高速公路扩建工程材料再利用施工技术及效益分析

为节省高速公路扩建工程中施工材料,可以对原本旧路面破除的材料进行循环利用.唐山至天津高速公路扩建工程破除材料全部利用再生技术,取得了良好的经济、社会效益,值得在同行中推广.